MSHA Training

MSHA Training by Casper Safety

Part 46 & Part 48 New Miner and Annual Refresher Training

MSHA Training is a federally mandated requirement designed to protect miners from the serious hazards associated with surface and underground mining operations. Casper Safety (CS) is a trusted leader in the industry, providing compliant, high‑quality MSHA Training programs that help mining companies meet federal requirements while building a strong culture of safety.

For over two decades, Casper Safety has delivered professional safety instruction to mining, aggregate, and industrial operations throughout the region. Our MSHA Training programs are built around real‑world mining conditions, regulatory compliance, and proven instructional methods that ensure miners understand how to work safely and confidently on site.

Why MSHA Training Is Required by Law

The Mine Safety and Health Administration (MSHA) operates under the Federal Mine Safety and Health Act of 1977, which requires all miners to receive initial and annual safety training. MSHA makes it clear that every miner must receive basic training and annual refresher training, and that mine operators must maintain an effective written training plan.

🔗 MSHA Training Requirements (Official MSHA Website)
https://www.msha.gov/training

MSHA Training requirements are codified in federal law under:

• 30 CFR Part 46 – Surface aggregate and non‑metal mines
• 30 CFR Part 48 – Underground mines and surface areas of underground mines

🔗 30 CFR Part 46 – Training and Retraining of Miners
https://www.ecfr.gov/current/title-30/chapter-I/subchapter-H/part-46

🔗 30 CFR Part 48 – Training and Retraining of Miners
https://www.ecfr.gov/current/title-30/chapter-I/subchapter-H/part-48

Although OSHA regulates most workplaces, mining is specifically excluded from OSHA jurisdiction. Instead, MSHA has sole authority at mine sites. This distinction is outlined in the official OSHA–MSHA Interagency Memorandum.

🔗 MSHA–OSHA Jurisdiction Agreement
https://www.msha.gov/msha-and-osha-memorandum

This is why MSHA, not OSHA training, is required for miners.

Casper Safety (CS): A Trusted Leader in MSHA Training

Casper Safety (CS) has earned a reputation as a trusted leader in safety training by delivering programs that go beyond minimum compliance. Our instructors bring real mining and field experience into every class, helping miners understand not just what the rules are—but why they matter.

When you choose Casper Safety for your MSHA, you get:

• Experienced MSHA‑qualified instructors
• Training aligned with your mine’s specific hazards
• Clear documentation and records for inspections
• Practical, easy‑to‑understand instruction
• Support with training plans and compliance questions

Our goal is simple: help miners go home safe at the end of every shift.

MSHA Programs Offered by Casper Safety

MSHA New Miner Training – 24 Hours

MSHA Training for new miners is required before they can work independently on a mine site.

• 24 hours total training required
• Minimum of 8 hours completed before starting work
• Remaining hours completed within the allowed timeframe
• Applies to both Part 46 and Part 48 operations (based on mine type)

🔗 MSHA New Miner Training Requirements (Official FAQ)
https://www.msha.gov/training-education/frequently-asked-questions/what-are-mshas-training-requirements-new-miners

Topics Covered:

• Miners’ rights and responsibilities
• Hazard recognition
• Emergency procedures and evacuation
• Ground control and highwall safety
• Mobile equipment and traffic safety
• Electrical hazards
• Health hazards (dust, noise, chemicals)
• Accident prevention
• Site‑specific and task training

This training ensures new miners understand the risks of mining before they are exposed to them.

MSHA Annual Refresher Training – 8 Hours

After initial training, MSHA requires 8 hours of annual refresher MSHA Training for all miners.

🔗 30 CFR §48.28 – Annual Refresher Training
https://www.ecfr.gov/current/title-30/chapter-I/subchapter-H/part-48/subpart-B/section-48.28

Annual refresher training must include:

• Changes at the mine affecting safety or health
• Mandatory MSHA standards related to job tasks
• Emergency response and evacuation plans
• Fire prevention and firefighting
• First aid review
• Electrical hazard awareness
• Accident and near‑miss review
• Health and exposure controls

Casper Safety customizes refresher training to match your mine’s current conditions, equipment, and hazards.

Part 46 vs. Part 48 MSHA Training Explained

Understanding which MSHA applies to your operation is critical.

Part 46 MSHA Training

• Surface aggregate and non‑metal mines
• Trainers must be competent persons
• Training plans do not require MSHA approval
• Applies to sand, gravel, stone, clay, limestone, etc.

Part 48 MSHA Training

• Underground mines and surface areas of underground mines
• Trainers must be MSHA‑approved instructors
• Training plans must be approved by MSHA
• Includes coal, metal, and underground mining

🔗 MSHA Training Overview – Part 46 vs Part 48
https://www.msha.gov/training

Casper Safety (CS) helps you determine exactly which MSHA Training applies to your site.

Documentation and Records

Proper documentation is a critical part of MSHA Training compliance. Casper Safety provides guidance and support with:

• Written MSHA training plans
• Attendance records
• Task training documentation
• Annual refresher records
• MSHA Form 5000‑23 (or equivalent)

Accurate records protect your company during MSHA inspections and audits.

Why Companies Choose Casper Safety for MSHA Training

Companies choose Casper Safety because we understand mining operations, not just regulations. Our Training is practical, engaging, and designed to reduce incidents—not just check a box.

Benefits include:

• Reduced injuries and accidents
• Improved compliance confidence
• Better hazard awareness among miners
• Stronger safety culture
• Clear inspection readiness

MSHA Training delivered by Casper Safety is an investment in your people and your operation.

Frequently Asked Questions (FAQ)

Is this training mandatory?

Yes. Federal law requires MSHA Training for all miners working at covered mines.

How often is MSHA Training required?

• New Miner: 24 hours
• Annual Refresher: 8 hours every 12 months

Does OSHA training count for miners?

No. Mining operations fall under MSHA, not OSHA.

Can Casper Safety help with training plans?

Yes. Casper Safety (CS) assists with training plans, documentation, and compliance guidance.

Schedule MSHA Training with Casper Safety (CS)

If you need reliable, compliant, and professional MSHA Training, Casper Safety is the clear choice. We are a trusted leader in the industry and a partner you can rely on.

📞 Call: (307) 235-9112
📧 Email: training@caspersafety.com
📝 Request Training Dates: Contact